EN 1090 – prepare for certification - Quality Austria Polska
☰
Zurück zur PL-Version FSC® Certification Was ist ein FSC® Zertifikat? Flyer herunterladen Contact
24 August 2022

A series of free guides

EN 1090 – prepare for certification

„EN 1090 certification” – this is an issue that frequently arises in requests for quotations or in delivery specifications. It continues to cause quite a deal of confusion amongst manufacturers and construction industry firms within the supply chain.

We’re giving you this guide – if you’d like to read it in a more user-friendly format, send a message, and we’ll send it to your email address as a PDF.

Introduction

„EN 1090 Certificate” – the relevant requirements were defined as early as 2011 with the publication of Regulation (EU) No 305/2011 of the European Parliament and of the Council. Businesses contacting Quality Austria-Polska highlight the lack of consistent and comprehensive information regarding the necessary steps to be taken. This has led to the need to develop a guide providing information on the steps a manufacturer must take to operate in the construction products sector in accordance with the Regulation.
The aim of this publication is therefore to guide the reader step by step through the issue of conformity assessment in relation to the standard EN 1090 and provide basic information in this regard concerning the obligations that must be fulfilled.
What will you find in this publication?
1. Regulation 305/2011 (CPR) - conditions for the placing on the market of construction products:
What is it, why is it important, and what does it entail?
How can I check whether the product being manufactured is covered by this regulation?

2. Standard EN 1090:
What is it? Where did the need to meet its requirements come from?

3. CE marking:
Am I always required to mark the product with this symbol?
Can I apply for individual approval?

4. In-House Production Control (ZKP):
How does it relate to EN 1090, and how can its basic requirements be met?

5. EN 1090 certification:
How should you prepare for the certification?
What information will the auditor be expecting?

Basic information on EN 1090

Regulation (EU) No 305/2011 of the European Parliament and of the Council (the CPR Regulation) laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC is a document which came into force on 1 July 2014. It thereby repealed the previously applicable Council Directive 89/106/EEC on construction products. This document was transposed into Polish law by the Act of 13 June 2013 amending the Act on Construction Products and the Act on the Conformity Assessment System.
You can view the text of the regulation on the EUR-Lex website, which publishes acts adopted at European Union legislative level, via the following link:
https://eur-lex.europa.eu/legal-content/PL/TXT/?uri=CELEX%3A32011R0305

Who is covered by Regulation 305/2011, and to what extent?

The Regulation lays down the conditions for the placing on the market or making available on the market of construction products.
In accordance with Regulation 305/2011:

  • ‘placing on the market’ means making a construction product available on the EU market for the first time
  • ‘Placing on the market’ means any supply of a construction product for distribution or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge.

Consequently, if your company, for example, manufactures construction products or acts as an intermediary in the sale of construction products, Regulation 305/2011 will apply.
Detailed information on the obligations of entities operating within the supply chain, such as:

PLEASE NOTE
A very important element of the Regulation is the definition of „construction products” set out in Regulation 305/2011 (Article 2(1)), which states that:
construction product means any product or kit manufactured and placed on the market for permanent incorporation into construction works or parts thereof, the characteristics of which influence the performance of the construction works in relation to the basic requirements for construction works.
In fact, the above definition, formulated at such a high level of generality, does not provide an unambiguous description of a construction product. A manufacturer may face the dilemma of whether to classify the products they manufacture as construction products falling within the scope of Regulation 305/2011, or not. To ascertain whether the products being manufactured are subject to the aforementioned Regulation, we should refer to harmonised standards or CEN mandates.
Harmonised standards in accordance with Regulation 305/2011, these are standards specifying, amongst other things:

  • methods and assessment criteria for the performance characteristics of construction products,
  • reference to specifications and technical features,

which are necessary for the implementation of a system for the control, assessment and verification of the durability of performance characteristics.

For example:
A standard harmonised with Regulation 305/2011 is the standard designated as EN 1090-1:2009+A1:2011 „Execution of steel and aluminium structures – Part 1: Rules for the assessment of conformity of structural components”.

You can purchase the EN 1090 standard via the Polish Committee for Standardisation’s digital sales platform for products and services:
http://sklep.pkn.pl/pn-en-1090-1-a1-2012p.html
A full list of harmonised standards can be found in the Commission Communication issued pursuant to Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products:
https://eur-lex.europa.eu/legal-content/PL/TXT/HTML/?uri=CELEX:52018XC0309(09)&from=PL
The Regulation sets out guidelines and a framework for an assessment system applicable to the entire range of construction products. It is important to note that, for specific construction products or types (families) of such products, other systems for the assessment and verification of the constancy of performance may be established.
These systems may be developed by organisations that draw up harmonised standards and by Technical Assessment Bodies (TABs). An example of this approach is the system specifically designed for steel and aluminium structures, as set out in standard EN 1090.
The EN 1090 standard on the execution of steel and aluminium structures consists of 5 parts:

Why is the Regulation important for manufacturers or those placing construction products on the market?

The Regulation lays down the conditions for placing construction products on the market or making them available on the market. It applies to virtually all economic operators in the supply and distribution chain, namely manufacturers (and, where applicable, their authorised representatives), importers and distributors. In accordance with the legal requirement, all of them must take appropriate measures to ensure that they place on the market or make available on the market only construction products that comply with the requirements set out in Regulation 305/2011.

Who should carry out EN 1090 certification?

Follow the steps below to check whether you should undergo certification for compliance with the EN 1090 standard.

STEP 1

  • Determine whether the product is a construction product as defined in Regulation 305/2011.
  • See the definition of a construction product.

STEP 2

  • Check whether there is a harmonised technical specification for the product.
  • Click on the link below to the Europa website to check whether there is a harmonised European standard (hEN):

https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/construction-products_en

  • If a harmonised standard exists, the product must bear the CE marking.
  • If there is no harmonised standard, check whether there are any approved (ETAG) guidelines from the European Organisation for Technical Approvals (EOTA) under the CPD, or a European Assessment Document (EAD) under the CPR.

The ETAG or EAD stems from a mandate issued by the European Commission and the European Free Trade Association (EFTA). This means that other manufacturers have applied for an ETA [European Technical Approval (CPD) or European Technical Assessment (CPR)] and have the same or similar products on the market bearing the CE marking.
Companies must now decide whether to apply for an ETA, which will enable them to use the CE mark.
If a product falls within the scope of the EAD, the decision as to whether to apply for an ETA remains at the manufacturer’s discretion, and in this respect, CE marking will remain voluntary for such products.

STEP 3

If a product is not covered by a harmonised standard or a European technical approval, there is no obligation to affix the CE marking to that product in accordance with Regulation 305/2011.

What does the EN 1090 standard require of your company?

Where an importer or distributor:

    • places a product on the market under its own name, or
    • places a product on the market under its own trade mark, or
    • where it modifies a construction product previously placed on the market in such a way that this may affect its conformity with the declaration of performance,

in which case the importer or distributor is deemed to be the producer and must comply with the obligations and requirements set out in the Regulation.

EXC performance classes are one of the most important concepts introduced in EN 1090. This is a classification of structures under EN 1090 – importer-distributor – in relation to:

  • the consequences of any damage (economic loss or loss of life),
  • risks associated with the use of the structure (dynamic loads, earthquakes, etc.),
  • risks associated with the construction of the structure (types of steel, welded or bolted joints, etc.).

The choice of EXC is a decision made by the structural engineer.
Many of the requirements of standard EN 1090 are defined in accordance with the EXC classification, both in terms of execution and quality control. Table A3 in EN 1090-2 provides an exhaustive list of the requirements for each EXC execution class.
Four performance classes have been defined:

EXC may be applied to the entire structure or to its individual parts or structural elements. The structure as a whole may contain components belonging to several EXC classes.
The CE marking is a declaration by manufacturers of structural works that their product complies with the relevant standard in the EN 1090 series and therefore meets the requirements of the CPD (Construction Products Directive).
Basic requirements:

  • carrying out initial type testing (ITT) or initial type calculations (ITC);
  • the operation of the factory production control (FPC) system, including the quality management system for manufacturing processes;
  • defined staff roles for welding supervision;
  • manufacturer certification carried out by an accredited (authorised) certification body (e.g. Quality Austria);
  • supervision carried out at the production site by a certification body (e.g. Quality Austria).

The EN 1090 standard sets out requirements and specifies assessment methods for the following characteristics of structural components:

  • Dimensional and shape tolerances,
  • Weldability,
  • Resistance to brittle fracture,
  • Load capacity,
  • Fatigue strength,
  • Fire resistance,
  • Reaction to fire,
  • Hazardous substances,
  • Impact resistance,
  • Durability.

In many instances where applicable and feasible, the EN 1090 standard refers to the relevant, specific standards. This applies to both the requirements and the methods of conformity assessment, which are intended to confirm that components comply with the requirements of EN 1090. Conformity can be confirmed by carrying out a preliminary type test and the use of in-house production control.
Preliminary study of the type – this involves carrying out a series of tests on representative samples of a specific type of product and performing the initial calculations. The standard permits the manufacturer to draw on their previous experience in the manufacture of similar products, with similar characteristics, test methods, types, etc.
In-house production control (ZKP) – a system for managing, supervising and controlling production, designed to provide a level of assurance that the organisation is capable of manufacturing products in accordance with, and to a consistent standard of, the product specifications. The Quality Management System should be based on procedures and instructions.
As part of this element, a quality management system compliant with the ISO 9001 standard, for example, may be used, provided that its scope covers manufacturing processes.
See here:
ISO 9001:2015 – The revision of the standard in simple terms – Quality Austria Polska
What are the requirements of the ISO 9001:2015 standard? In this publication, you will learn about the key areas of change introduced in 2015 to the published ISO 9001 standard.

EN 1090 – Quality management system for welding

Whilst working on this e-book, we contacted people who had expressed a need for this publication. The vast majority of those we spoke to manufacture structures by joining components using welding processes. Consequently, the principles for a welding quality management system (WQMS – Welding Quality Management Systems) are set out below.
Any quality management system in a manufacturing process, including welding, should ensure that the planned outcomes for the process are achieved. This approach can be facilitated by examining the welding process using the ‘turtle diagram’ shown below.
Consider whether you can describe the welding process used in the manufacture of steel/aluminium structures by answering the questions below using the so-called ‘turtle diagram’.

Using the diagram above, the planned welding process should be based on the following considerations:

As regards quality requirements, in principle, the following requirements must be applied ISO 3834 standard. The ISO 3834 series of standards applies to companies that use welding processes in their manufacturing operations. Three standards are used in this context:

  • EN ISO 3834-2 Full quality requirements,
  • EN ISO 3834-3 Standard quality requirements,
  • EN 1090 – welding process.

Declaration of performance

The Declaration of Performance is the central concept of the Construction Products Regulation. This document contains information on performance in relation to defined characteristics.
The manufacturer or the person placing the product on the market may issue a declaration of performance where the construction product complies with:

  • in accordance with the relevant harmonised standard, or
  • the European Technical Assessment issued for it.

The responsibility of the manufacturer or distributor boils down to ensuring that the product complies with its declared performance characteristics. Through this structure of the liability system, the purchaser receives relevant information about the products placed on the market. In this way, the purchaser is able to make an informed decision regarding the use of specific products in building structures.

Exemptions from the obligation to draw up a declaration of performance:

  • a construction product is manufactured as a single item or to a non-standard order and is incorporated into a single specific building;
  • a construction product is manufactured on-site for the purpose of incorporating it into specific construction works;
  • The construction product is manufactured using traditional methods or in accordance with the requirements for the preservation of historic monuments, and through a non-industrial production process.

In all the above cases, products must be manufactured in accordance with the applicable national regulations.
The procedure for assessing and verifying the constancy of performance of construction products in relation to their essential characteristics is set out in Annex V to the Regulation. Such an assessment may be carried out in accordance with one of the five systems set out in the table below. The table also sets out the division of responsibilities between the manufacturer and the Notified Body (certifying body).

SYSTEMS FOR ASSESSING AND VERIFYING THE CONSISTENCY OF PERFORMANCE CHARACTERISTICS

Entity Function System
1+ 1 2+ 3 4
Manufacturer determining the type of product on the basis of tests - - v - v
in-house production control v v v v v
further testing of product samples v v v -
Certification body determining the type of product on the basis of tests v v - v -
Initial inspection of the production site and the in-house production control system v v v - -
ongoing supervision, assessment and approval of in-house production control v v v - -
follow-up testing of samples taken before the product is placed on the market v - - - -

To summarise, a construction product should only be placed on the market once we are certain that it complies with the requirements of Regulation (EU) No 305/2011. In the case of steel and aluminium structures, this means that:
1. The requirements of standard EN 1090-1 ‘Execution of steel and aluminium structures; Part 1: Principles for the assessment of conformity of structural components’ must be met.
2. The requirements relating to the product must be met:

  • the requirements of standards EN 1090-2 / EN 1090-3 / EN 1090-4 / EN 1090-5,
  • the requirements of other relevant harmonised standards,
  • the requirements set out in the European EOD assessment documents, where applicable.

3. Implement in-house production control (ZKP).
4. Undergo a conformity assessment by the notified (certification) body Quality Austria.

CE marking

The CE marking is affixed to construction products for which the manufacturer has drawn up a declaration of performance. By affixing the CE marking, the manufacturer indicates that it accepts responsibility for:

  • the conformity of the construction product with its declared performance characteristics, and
  • for its compliance with all applicable requirements set out in this Regulation and other relevant European Union legislation relating to the affixing of this marking.

The appearance of the CE marking is governed by the general principles set out in Article 30 of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008.

The CE marking must be affixed in a visible, legible and durable manner:

  • on a construction product or
  • on its label.

How to avoid making costly mistakes when implementing EN 1090

Based on experience to date with EN 1090 certification, several key factors can be identified which contribute to failure, increased costs or a longer time taken to obtain certification.
Applying for certification without first ensuring that the basic requirements are met carries a fairly high risk, which may result in the certificate being refused.
To minimise the above-mentioned risk, it is advisable to:

  • ensure that the company’s staff are competent – e.g. through training on the requirements of EN 1090 for manufacturers,
  • get in touch with Quality Austria for an information session – to ensure you complete the certification process smoothly,
  • carry out a preliminary inspection – as a result of which Quality Austria’s auditors will identify all the requirements that must be met in order to obtain the certificate.

Examples of non-conformities leading to the refusal to grant a certificate:

  • There is no welding procedure specification (WPS) approved on the basis of a welding procedure qualification record (WPQR).
  • There is a lack of documentation describing the manufacturing processes to ensure process repeatability (for example, in the areas of handling welding non-conformities).
  • Lack of the necessary qualifications among staff carrying out welding processes (for example, lack of a welder’s qualification certificate in accordance with PN EN ISO 9606-1).
  • Lack of the necessary qualifications amongst staff carrying out quality control processes (for example, lack of a certificate of competence).
  • No records are kept of welding processes (for example, tack welding, welding).
  • There are no material certificates confirming that the base materials have been used in accordance with the design requirements.
  • No certificates of acceptance in accordance with standard EN 10204.

What are the stages of EN 1090 certification and how is the audit carried out?

The certification process is as follows:
Preliminary inspection
This involves assessing the organisation’s current status (in the form of an on-site audit) by determining the extent to which it complies with the requirements of EN 1090. Following this stage, the organisation will receive guidance on how to bring its practices into line with the requirements of EN 1090.
The initial inspection is intended to determine the extent to which products and processes comply with the requirements of standard EN 1090. It consists of a detailed on-site review and covers, in particular:

  • a review of the internal production control (ZKP) process,
  • assessing the effectiveness of the entire system in preparing staff across all areas and sites for the certification audit,
  • an on-site assessment of specific aspects of the system and its implementation,
  • identifying non-conformities,
  • planning the certification audit process.

Following the successful completion of the preliminary inspection, the organisation will be eligible for the certification inspection.
Certification inspection will be carried out at the organisation’s premises (with the option of conducting an audit at subcontractors’ premises) in accordance with an audit plan drawn up jointly with the Quality Austria Certification Body.
The certification audit covers all areas of the organisation’s operations, such as:

  • production,
  • subcontracting and assembly instructions,
  • where applicable – design.

These areas will be examined, with particular emphasis on:

  • in-house production control,
  • maintaining the agreed levels of workmanship,
  • maintaining the consistency of the products’ functional properties.

Should any non-conformities be identified, the organisation will be required to implement corrective actions, the implementation of which will be monitored by Quality Austria Polska. Additional on-site inspections may also be carried out.
Following an audit and confirmation of compliance with the requirements of standard EN 1090, the manufacturer or its authorised representative established within the European Economic Area shall draw up and retain a declaration of conformity entitling it to affix the CE marking.
Supervisory inspections will be carried out at fixed intervals determined in accordance with the requirements of standard EN 1090-1.

Validity and content of the EN 1090 certificate

The certificate is valid for as long as:

  • the relevant version of standard EN 1090 applies,
  • the production conditions and the ZKP system have not changed significantly,
  • The required surveillance inspections are carried out at intervals depending on the selected performance class.

The certificate issued by the Certification Body contains the following information, in accordance with the Declaration of Conformity issued by the manufacturer:

  • type of structural material (steel / aluminium),
  • performance class,
  • the declaration method.

EN 1090 – what next?

We hope that, whilst reading this guide, you’ve come up with lots of questions and ideas on how to apply this new information about EN 1090 in your work, for example:

  • How should one approach the requirements and recommendations of the standard?
  • How can all this be brought together into a coherent, well-functioning system?

The aim of this paper was to provide readers with a practical introduction to the issues covered by EN 1090. However, we realise that the subject has not been covered exhaustively and that certain areas require discussion and/or practical exercise under the guidance of an experienced expert. We therefore have a proposal for you, the reader. Let’s stay in touch.
We look forward to working with you!

EN 1090 training courses
We offer our expertise and experience during our open training course:
If you are a manufacturer of steel and aluminium structures, and you do not have sufficient knowledge to undertake the certification process within your company, and you would like to find out whether your product is eligible for the CE mark – take part in the training course.
Through this training course, you will learn, amongst other things, about the key requirements of EN 1090 that you need to meet in order to proceed with the certification process.

EN 1090 certification
If you would like the development and verification of your Management System to be handled by practitioners who are goal-oriented and focused on efficient operations – and who will not only verify the accuracy of your documentation but also help protect you from costly and stressful problems – please do get in touch.
Throughout the audit, you can count on our support at every stage of our collaboration. We are known for our professional approach and the collaborative atmosphere we foster. Our role does not end with the delivery of a cryptic report. The Certification Director is at your direct disposal to answer any questions you may have and explain the contents of the report.
Implementing the standard is a good time to start working with a certification body. Opt for a collaborative, friendly approach and professional services.

Would you like to find out more about EN 1090 certification? Get in touch with me:

Unfortunately your search was unsuccessful. Please check your settings and your spelling.

Do you need a workshop tailored to your company’s needs? Please contact me:

Unfortunately your search was unsuccessful. Please check your settings and your spelling.

News & Events

The basis for long-term success!

26. Oct 2026

Certyfikat ECM – bezpieczeństwo na każdym torze

ECM – obowiązek i odpowiedzialność 

Learn more
09. Oct 2026

Umowa partnerska z jednostką certyfikującą z Chin w obszarze FSC® Chain of Custody

Quality Austria-Polska rozwija współpracę międzynarodową.

Learn more
05. Oct 2026

Regulatory Update EU | Changes to EU law for businesses

Przegląd wybranych zmian w przepisach Unii Europejskiej lipiec-sierpień 2026

Learn more
27 August 2026

PPWR – current status

PPWR from 12 August 2026 – what do the new regulations mean for businesses?

Learn more
24. July 2026

Regulatory Update EU | Changes to EU law for businesses

Overview of selected changes to European Union regulations May-June 2026

Learn more
12. May 2026

A sign of confirmed quality

Quality Austria Certification introduces a new seal for its customers

Learn more
21. Apr 2026

New version of ISO 14001:2026 published

A new version of the ISO 14001:2026 standard has been published

Learn more
16. Apr 2026

Wood industry certification

How are FSC®CoC, PEFC CoC and ISO 38200 different and similar?

Learn more
March 30, 2026

ISO 9001:2015 WILL BE REVISED

Another revision of the ISO 9001 standard

Learn more
March 30, 2026

FSC CoC® accredited certification body

Quality Austria-Poland - an accredited body registered in Poland

Learn more
23. March 2026

ISO 9001:2015, Amendment 1:2024

Integrating climate change into quality management

Learn more
19. Jan 2026

What is FSC®?

Find out what FSC is, what it means, and how to get certified.

Learn more
+48 32 226 60 07